hot test
英 [hɒt test]
美 [hɑːt test]
热试验；高温试验
双语例句
- The slot plug succeed both in cold test and hot test, which can be applied in ladle for bottom blowing as well as bottom powder injection.
这种带锥形流化室的透气砖，既可用于钢包底吹气又可用于钢包底喷粉，在冷热态条件下进行了实验并获得成功。 - The results of hot test show that this ameliorates measure can solve high temperature corrosion problem.
经过实炉的热态实验表明，该文所提出的改造方案，能够解决高温腐蚀问题。 - Methods: The hot plate test in mice and the tail stimulation vocalization test in rats were used.
方法采用电刺激法、醋酸扭体法及热板法等动物实验模型研究了症痛散对小鼠的镇痛作用。 - The effects of feed ratio and temperature on the main and side reactions were investigated in a hot model test, using a28mm fluidized bed.
在建立催化剂的小型流化床热模试验装置的基础上，考察了原料气配比及反应温度对主、副反应效果的影响。 - The utility model relates to a fuel system of a hot test machine for gasoline engines, which can effectively increase the safety and the reliability of the fuel system.
本实用新型涉及一种汽油机热试机燃油系统，能够有效提高燃油系统的安全可靠性。 - The systematic hydrostatic test ( dry run, hot test, dynamic test, actual start-up) is scheduled for next Monday.
系统水压试验（习、热试验、力试验、际开车）于下星期一进行。 - A Study on Hot Test and Thermal Stress and Distortion of Cast Copper Staves with Buried Copper Pipes
埋纯铜管铸铜冷却壁热态试验和热应力热变形研究 - 2 the acceptance test of the contract equipment is a stable and safe and continuous hot test run as specified in the contract to demonstrate that the contract equipment are in conformity with the technical specifications as specified in the contract.
合同设备的验收测试根据合同应进行稳定、安全、连续的热机测试以确定合同设备符合合同规定的技术规格。 - Hot Test of Emission in a Industrial Scale Circulating Fluidized Bed Boiler
循环流化床锅炉污染物排放规律的热态研究 - Cold-flow test and hot test were performed to test the performance of this system, test results show that this new system can satisfy designed objective and meet the practical requirements.
新型增压输送系统经过冷流试验和热试车的考核，结果均满足设计和使用要求。 - The Hot Test of Combusting Paper Making Sludge on Fluidized Bed
用流化床焚烧造纸污泥的热态试验 - The cold and hot test of the ash cooler before operating are introduced herein.
就该种冷渣器在投运前的冷、热态试验做了简要说明。 - Attach importance to cold wear and hot test of engine after heavy repair
重视发动机大修后的冷磨热试 - The optimum construction and p-V characteristic curve of air and gas have been obtained by the 1: 1 cold and hot test for designing of WQ-10 flat flame gas burner.
通过对WQ-10型煤气平焰烧嘴进行各种关键尺寸的1：1冷态和热态试验，确定了合理的结构尺寸，并获得了空气和煤气p-V特性曲线。 - The radiation mode image and total power are obtained by hot test, which is based on precisely calibrating of the measurement system.
在准确标定测量系统的基础上进行了热测实验，得到了辐射模式图和辐射总功率。 - The experimental results also provided the optimum operating condition and control methods for hot test.
为热态实验寻找到最佳的操作条件和控制手段。 - The coupling resonance criteria are obtained after the analysis of large amount of engine hot test rotating speed measurement data.
对某发动机大量热试转速数据作了分析，给出判断此类耦合谐振的判断依据。 - The hot test of the copper cooling stave with circular channels was done in the test furnace designed by the authors.
在自行研制的热态试验炉上对圆孔型铜冷却壁进行了热模拟试验。 - Adopting biological wastes as reburning fuel to reduce NO in simulated gas, hot test has been carried out in a small dropper tube furnace.
在小型滴管炉内进行了采用生物质废弃物作为再燃燃料还原模拟烟气中NO的热态试验。 - Based on structure and operating principle of oxygen sensor, in detail author introduces the application of contrastive analysis method and the common fault of oxygen sensor detected by testing data statistic analysis and time-domain analysis in the hot test.
基于O2传感器的结构和工作原理详细介绍了在本项试验中应用的对比分析法。通过对试验数据的统计分析，对检测到的O2传感器常见故障进行时域分析。 - The test run result shows that the operation of the hot test unit was good, and the requirement of design was realized.
运行结果表明，该试验装置运行良好，达到了设计要求。 - Fungiform configuration was used in the main LOX valve to meet the demand of gas generator hot test system. The main LOX valve was designed to cut off automatically.
根据发生器热试系统的要求，设计的液氧主阀采用菌阀结构，通过结构设计使阀门具备主动关闭功能，产品经过常温和低温的验收试验检查，满足发生器热试要求。 - Application of Meishan Steel RH-MFB on stage of hot test
梅钢RH-MFB多功能顶枪在热试阶段的应用 - The operating mode setting, data analysis, wave contrast, fault detection of the 3. 4L 6 cylinders electronic controlled engine's 20 minute hot test with load are discussed.
论述了某3.4L6缸电控汽油机带负荷20min热试项目中试验工况的设置、数据分析、波形对比和故障检测。 - Cold and Hot Test Study on the Rolling-cylinder Type Slag-cooler of CFB Boiler
循环流化床锅炉滚筒式冷渣器冷态及热态特性试验研究 - Analysis of the Cause of Resonance Waves on the Thrust Profile of the Variable-thrust Liquid Propellant Rocket Engine, and Improved Concept of Hot Test Stand
关于变推力液体火箭发动机推力曲线上谐振波成因的分析和热试车台的改进方案 - At last, the hot test of the whole tube is also tested.
最后，对整管进行了热测试。 - Based on these researches, the whole system for hot test is fabricated.
在此基础上，加工组装了用于热测实验的整体实验装置。